Analysis
New Brembo's secret F1 brake disc: the theory explained
Red Bull is believed to have tested an experimental Brembo brake disc. Here is the theory behind its design and why temperature control matters.

Red Bull is believed to have tested an experimental Brembo brake disc during practice in Austin and Mexico City, raising questions about a potential new approach to managing brake temperatures in Formula 1.
The disc’s design has not been publicly confirmed. However, technical illustrator Giorgio Piola has proposed a theory about what Brembo could be developing and why the solution may be particularly relevant to the 2026 generation of F1 cars.

What is known about the experimental disc?
According to Formula 1’s technical contributors Mark Hughes and Giorgio Piola, Red Bull took particular care to shield the experimental discs from photographers when they were fitted in Austin and Mexico City.
The same restrictions were reportedly absent when conventional discs were installed. Other teams may also have tried the experimental design, although that has not been confirmed.
The exact shape of the new disc remains unknown. Piola’s explanation is an interpretation of what the hidden design could look like, rather than a description based on photographs of the component itself.

The theory: blind holes on the disc surface
Piola’s idea was prompted by a detail he observed on the Ferrari 499P Hypercar at the 6 Hours of Monza.
The endurance car’s brake discs feature recessed slots that help teams monitor wear. Those markings serve a different purpose from the solution Piola believes Brembo may be exploring for F1.
His proposed design combines the disc’s existing internal cooling holes with additional blind holes on its inner friction surface. Unlike a hole drilled completely through a component, a blind hole stops before reaching the other side.

In Piola’s interpretation, these recesses could form part of a slotted pattern while leaving the main cooling passages through the disc’s thickness in place.
The distinction matters because grooves themselves are not new. They have appeared on F1 brake discs before and can help clear material from the friction surface. The potentially novel element in Piola’s theory is the arrangement of the blind holes and how it could influence the disc’s temperature.
Why temperature control matters in 2026
An F1 brake disc must deal with intense heat under braking, but the challenge is not simply to make it as cool as possible. Drivers also need a consistent response when they press the pedal.

Brembo has explained that the 2026 regulations give designers more flexibility around brake callipers, while changes to the cars and their hybrid systems have altered braking demands.
The more powerful electrical system can recover energy as the car slows, reducing the work required from the rear friction brakes in some conditions. Our guide to how F1 brake-by-wire works explains how the car blends electrical recovery with the rear hydraulic brakes.

Piola suggests that the proposed blind-hole arrangement could help the disc retain a more consistent temperature, potentially reducing how much it cools on a straight. That remains a theory, including whether Brembo’s experimental disc uses this arrangement and whether it produces the intended effect.
What happens next?
Piola has offered an illustration of his proposed solution, but a clear view of the actual experimental disc would be needed to establish whether his interpretation is correct.
With the Las Vegas Grand Prix approaching, the question is whether the component appears again and whether teams are prepared to let the cameras see it.
